Ordering & Shipping - View Shopping Cart - Back to ASR/EPS Page - Back to Home Page

Ensoniq ASR-10, EPS, and EPS-16 Plus
SCSI Kits

Adding a SCSI interface allows you to connect your sampler to a hard drive, removable cartridge drive (such as a Zip drive), or CD-ROM drive, for nearly instantaneous loading of sounds and for mind-boggling storage capacity. An improvement on the original Ensoniq SCSI interface, our interface uses less power (and is thus easier on the keyboard's already-taxed power supply), and it allows the EPS-16 Plus to be used with an Iomega Zip drive. The SCSI kit includes complete installation instructions; installation is not difficult, though we do recommend taking your keyboard to a service center if you are not comfortable with the procedure. The EPS SCSI kit requires that you use O.S. version 2.49 in your sampler. Also, the SCSI kits for both the EPS and the EPS-16 Plus mount inside a memory expander cartridge, so you must have this expander in order to install the SCSI kit. ASR-10 SCSI kits are unfortunately no longer available.

NOTE: The EPS will not recognize a CD-ROM drive or a Zip drive; you must use an older Mac-style fixed hard drive.

ASR-10 SCSI Kit (Part #SCSIA)		N/A
EPS SCSI Kit (Part #SCSIE)		$149.95
EPS-16 Plus SCSI Kit (Part #SCSI6)		$149.95

	SCSI Cable, 3-foot, DB-25 male to 50-pin Centronics (Part #SCSIC2)		$16.95
	SCSI Cable, 6-foot, 50-pin Centronics to 50-pin Centronics (Part #SCSIC4)		$16.95

Starter Kits - Sound Disks - CD-ROMs - Effects Disks - Drum Beats - O.S. Disks & EPROMs
Memory Expanders - Pedals - Manuals & Videos
SCSI Drives - Cords & Cables - Sampling CD's - Books & Videos - Repair Parts
Back to ASR/EPS Page - Back to Home Page